ARIA ENERGY TAPE v1.0.0 — optimized GPU miner for Retro Boomer TAPE (Poseidon2b), getwork pools
==================================================================================

QUICK START — this is ALL you need:
    tar xzf ariaenergy-tape-v1.0.0-linux-x86_64.tar.gz
    cd ariaenergy-tape
    ./ariaenergy-tape --pool https://pool.ariabrain.com/tape-rpc/ --address tape1YOUR_ADDRESS --worker RIG_NAME

  Another pool: give --pool its getwork address exactly as the pool writes it
  (https://HOST/PATH/ or http://HOST:PORT), final slash included.

REQUIREMENTS
  - NVIDIA RTX 30xx / 40xx / 50xx (Ampere or newer), driver 580 or newer
    (one binary covers all three generations)
  - Ubuntu 22.04 or newer (any distro with glibc >= 2.34)
  - a TAPE address (starts with tape1)

WHAT IT IS
  - One CUDA kernel built on the hardware carry-less multiplier of RTX 30, 40
    and 50 cards, tuned on each card at every start (about 8 seconds).
  - Start-up checks on every card: full hashes compared bit for bit with the
    official reference, then the real mining kernel compared with the CPU.
    The miner refuses to mine if a single result differs.
  - Every share found by a card is hashed again on the CPU before it is sent.

USEFUL OPTIONS
  --gpu-list 0,1       select cards (default: all)
  --selftest           run the start-up checks with more cases, then exit
  --tune-only          check and measure every card, then exit (no pool)
  --color always       colours and timestamps also when the log is piped or saved
                       (default: only on a terminal; --color never for none)

LOG LINES
  [pool]  job received: id, [user] or [dev], why it changed, height, share difficulty
  [GPUn]  share ACCEPTED / STALE / REJECTED, as answered by the pool
  [stats] every 10 s: hashrate per card [watts, MH/s per watt, clock, busy %],
          shares, queue, current job, GPU≠host (must stay 0)
  busy % is the part of the last 10 s the card spent hashing: it drops when the
  pool has no work to hand out (for example while the network moves to a new block).

DEV FEE: 2 % of mining TIME (5880 s yours / 120 s dev per 6000 s cycle), mined on
the same pool under worker "dev", shown once at startup. The dev wallet address
never appears in the logs. There is no disable switch in the public binary.

SUPPORT    : PulseMining Discord
